by JimAndros » Mon Jun 22, 2020 10:55 pm
Transom is polished, engine is in & bolted down permanently. I raised it as far as possible within the limits of the transom boot, but it's still lower than the bottom of the hull. I shimmed the mounts so the lower unit is parallel to the hull with the front mount at about 40%. So I have more trim up adjustment than trim down. Outdrive is only temp installed so I could use it to locate the engine. Needs to come off so I can hook up steering cable drum.
- Attachments
-

- 0622202235.jpg (1.31 MiB) Viewed 3936 times
-

- 0622202234.jpg (1.28 MiB) Viewed 3936 times